For laser marking machine ,if it takes a long time to use and is prone to some unexpected situations. Например, many users have found that the power of the laser marking machine has decreased. The following are some common reasons for the power loss of the laser marker.
1. Marking speed is too fast.
Решение: Slow down the marking speed appropriately.
2. The laser power supply voltage drops, causing the laser output power to drop.
Решение: Replace the power supply.
3. The optical path system is not accurate.
Solution one: adjust the laser.
Решение 2: Adjust the position of the beam expander. The incident light should be at the center of the aperture of the beam expander. And the exit light should be at the center of the exit hole.
4. The surface of the work piece is not on the focal plane
Решение: Adjust the surface of the work piece to the focus.
5. Beam mirror position and direction are not accurate.
Решение: Adjust the position of the beam expander.
6. The laser entering the galvanometer is off center
Решение: Adjust the laser.
7. Lenses on lenses and lenses
Решение: Clean or replace.
8. The equipment has been used for too long
Решение: Need to inflate or replace with a new laser.
When the laser marking machine is in maintenance and repair. Some operations require professional technicians to complete it. Do not disassemble and repair it yourself. Otherwise, it will not only damage the performance of the equipment. But also cause damage to the operator.
Если вы все еще не понимаете, пожалуйста, свяжитесь с Focuslaser
Электронная почта: sales@focuslaser.net
WhatsApp:+8615102000818
